EasyManua.ls Logo

Yealink W53P

Yealink W53P
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Customizing Your Phone
33
3. Press Save.
Eco Mode+
Eco mode+ turns off the transmission power and the radio waves emitted are virtually zero when the phone is in the
standby mode. If the eco mode+ is enabled, there is no signal interaction between the handset and the base station,
and the color of the signal strength indicator on the idle screen will be displayed in green. When a call arrives or a con-
nection occurs, the phone exits the eco mode+ automatically, and the color of the signal strength indicator on the idle
screen changes from green to white.
Topic
Setting the Eco Mode+
Setting the Eco Mode+
You can enable or disable the eco mode+.
Procedure
1. Navigate to OK->Settings->System Settings->Eco Mode+.
2. Press Change.
3. Enter the system PIN (default: 0000) and then press Done.
The phone prompts whether to reboot the base station.
4. Press Yes.
The base station reboots to make the change take effect. The change applies to all the handsets registered to the
base station. The color of the signal strength indicator on the idle screen will change from white to green.
Eco Mode
Eco mode greatly reduces the transmission power and signal output when the phone is during a call. The attenuation
range is 20m. When the distance between the base station and the handset is over 20m, the eco mode is disabled auto-
matically.
Topic
Setting the Eco Mode
Setting the Eco Mode
You can enable or disable eco mode. If the eco mode is enabled, the radio coverage of the base station will be reduced.
Procedure
1. Navigate to OK->Settings->System Settings->Eco Mode.
2. Press Change.
Repeater Mode
Repeater mode extends the radio coverage of the base station. This feature gives you more mobility in large dwelling. If
the repeater mode is enabled, and a repeater is registered to the base station, the handset registered to the base station
can be used either in the base station or the repeater coverage area. It provides users with greater freedom of mobility.
For more information on how to use DECT repeater with the base station, refer to Yealink DECT Repeater User Guide.

Table of Contents

Other manuals for Yealink W53P

Related product manuals