Yealink W53P

Yealink W53P & W60P User Guide
54
Topics
Holding a Call
Resuming a Held Call
Swapping Between Active and Held Calls
Holding a Call
Procedure
1. Press Options during a call, and then select Hold.
The phone screen indicates that the call is on hold.
Resuming a Held Call
Procedure
1. Press Resume, the Speakerphone key or Off-hook key.
If multiple calls are placed on hold, select the desired call first.
Swapping Between Active and Held Calls
You can easily switch between active and held calls.
Procedure
1. Do one of the following to swap the active and held calls:
l If the call is active, press the Swap soft key.
l Press the up or down navigation key.
Do Not Disturb (DND)
DND enables your phone to reject all incoming calls automatically when you do not want to be interrupted. You can
enable DND for specific lines.
Note
Check with your system administrator to find out if the DND feature is available on your phone.
Topics
Rejecting Calls with DND
Rejecting Calls with DND
You can activate DND for specific lines. The phone will reject all incoming calls automatically.
Procedure
1. Press OK->Call Features->Do Not Disturb.
The phone screen displays the incoming lines currently assigned to the handset. The default incoming line is high-
lighted and followed by a left arrow.
2. Select the desired line, and then press OK.
3. Select Enabled from the Status field.
4. Press Save.