Yealink W53P

Call Features
53
Procedure
1. Press Silence.
Rejecting a Call Manually
Procedure
1. Press the On-hook key to reject an incoming call.
Rejecting Anonymous Calls Automatically
You can set your phone to automatically reject incoming calls from callers who have withheld their caller ID inform-
ation (including the name or phone number). As a result, your phone will not ring and you will not be notified of an
attempted call.
Procedure
1. Navigate to OK->Call Features->Anon.Call Rejection.
The phone screen displays the incoming lines currently assigned to the handset. The default incoming line is high-
lighted and followed by a left arrow.
2. Select the desired line.
3. Select Enabled from the Status field.
4. Press Save.
When the caller has anonymous call feature enabled and places a call to your IP phones, the call is automatically rejec-
ted.
Related Topic
Placing an Anonymous Call
Ending Calls
Procedure
1. Press orEnd.
Muting/Unmuting Audio
You can mute the microphone temporarily during a call.
Procedure
1. Press the Mutekey during an active call.
The call is muted, and the mute icon is displayed on the phone screen.
2. Press theMutekey again.
3. The mute icon disappears from the phone screen.
Call Hold
You can place an active call on hold and resume the call when you are ready. When you place a call on hold, your IP
PBX may play music to the other party while waiting.