Yealink W53P

Advanced Features
63
Related Topic
Retrieving a Call with a Retrieve Key
Retrieving a Call with a Retrieve Key
You can easily use a retrieve key to retrieve a parked call quickly.
Topics
Setting a Retrieve Key
Retrieving a Call with a Retrieve Key
Setting a Retrieve Key
You can set a shortcut key as Retrieve key.
Before You Begin
Check with your system administrator if the FAC or Transfer mode is set on your phone.
Procedure
1. Navigate to OK->Settings->Shortcut.
2. Select the desired shortcut key, and then press Change.
3. Select Retrieve, and then press OK.
Retrieving a Parked Call using a Retrieve Key
Before You Begin
1. There is a call parked on the extension or the shared parking lot.
2. You need to set a Retrieve key.
3. Your system administrator has set call park feature for your phone.
Procedure
1. Press the Retrieve key when the handset is idle.
The handset will dial the configured park retrieve code.
Related Topic
Setting a Retrieve Key
Shared Line
Yealink IP phone supports using Shared Call Appearance (SCA) to share a line. So that this line can be registered on
more than one IP phone at the same time.
Your system administrator can set your phone to use shared line.
Note
Check with your system administrator to find out if SCA is available on your phone.
Topics
Placing Calls on a Shared Line