Yeastar Technology S20 Administrator's Guide

S-Series IP PBX Administrator Guide
98
The module is powered off.
No SIM card inserted.
No signal.
PIN/PUK Error.
GSM network registration failed.
Malfunction in module; please examine the relevant module.
Table 13-4 BRI/E1/T1 Trunk Status Description
BRI/E1/T1 Trunk Status
The trunk is idle.
1. Broken module/interface.
2. Incorrect physical layer configuration.
3. Service provider did not activate the trunk.
1. Incorrect protocol layer configuration.
2. Service provider did not activate the trunk.
1. Malfunction in interface/module; please examine the relevant interface/module.
2. No trunk plugged in.
3. Service provider did not activate the trunk.
Table 13-5 VoIP Trunk Status Description
VoIP Trunk Status
1. Registered
2. Unmonitored
Registering.
1. Unreachable
2. Registration failed, caused by:
 wrong password
 wrong authentication name
 wrong username
 transport type inconsistent

Yeastar Technology S20 Specifications

General

Brand	Yeastar Technology
Model	S20
Category	PBX
Language	English