S-Series IP PBX Administrator Guide
57
Match Outgoing Trunk: if enabled, only the incoming call that came to the PBX through the
same trunk which made the call will be match against the AutoCLIP List.
Member Trunks: choose the trunks, AutoCLIP Route will apply to the selected trunks.
Click View AutoCLIP List to view the records. In the AutoCLIP List you can see the record of the
unconnected call.
Figure 6-6 Auto CLIP List
As the above figure shows, when the user (284288432) has a missed call and returns the call, he will
be directly forwarded to extension 500 as shown in the AutoCLIP List.
Time Conditions
On Time Condition page, you can create time groups. A time group is a list of times against which
incoming or outgoing calls are checked. The rules specify a time range, by the time, day of the week,
day of the month, and month of the year. Time conditions can be assigned to an inbound route, which
control the destination of a call based on the time. Time conditions can also be assigned to an
outbound route in order to limit the use of that route.
Add Time Condition
Go to Settings > PBX > Call Control > Time Conditions, click to add time condition.
Figure 6-7 Add Time Condition
Name: give this Time Condition a brief name to help you identify it.
Time: this is where you will define a time range. You can define multiple ranges in the same time
group by clicking .
To Next Page
Loading...
Need help?
General
