6-6
IM CA500-01EN
6.5 Setting the Date Display Format
Procedure
1.
With the source value and measurement value displayed, press MENU. A menu screen
appears.
2.
Use the cursor keys to select Device Setup, and then press ENTER. A Device Setup screen
appears.
3.
Press the cursor keys several times to display Device Setup 2/2.
4.
Use the cursor keys to select Date Format, and then press ENTER. A list of options appears.
5.
Use the cursor keys to select the date display format you want to use, and then press ENTER.
Confirming the Settings
6.
Press the arrow key corresponding to EXIT SETUP. The settings are confirmed, and a screen
appears showing the source value and measurement value.
Pressing ESC causes the instrument to discard the settings and return to the menu screen.
To initialize the settings, pressing the arrow key corresponding to INIT SETUP.
Description
You can select the date display format from the following:
• YYYY/MM/DD: year (Gregorian)/month/day (default setting)
• DD/MM/YYYY: days/month/year (Gregorian)
• MM/DD/YYYY: month/day/year (Gregorian)
The format is applied to the date and time displayed in the upper left of the screen, the date and
time on the LOAD screen, and the date and time saved in CSV files from the CA550.
To Next Page
Loading...
Need help?
General
