6-4
IM CA500-01EN
6.3 Setting the Priority Power Supply
Procedure
1.
With the source value and measurement value displayed, press MENU. A menu screen
appears.
2.
Use the cursor keys to select Device Setup, and then press ENTER. A Device Setup screen
appears.
3.
User cursor keys to select Power Select. USB (USB power supply) and BATT. (Batteries)
appear on the selection menu.
4.
Use the arrow keys to set the priority power supply.
Confirming the Settings
5.
Press the arrow key corresponding to EXIT SETUP. The settings are confirmed, and a screen
appears showing the source value and measurement value.
Pressing ESC causes the instrument to discard the settings and return to the menu screen.
To initialize the settings, pressing the arrow key corresponding to INIT SETUP.
Description
When batteries and USB power supply are both available for running the instrument, you can select
the power supply to prioritize.
If either the batteries or USB power supply becomes unavailable, a switch is made to the available
power supply.
To Next Page
Loading...
Need help?
General
