YOKOGAWA CA500 User Manual

Source
Chapter 2 Source
2-1
IM CA500-01EN
1
2
3
4
5
6
7
Index
2.1 DC Voltage Source
Procedure
Setting the Function
1.
With the source value and measurement value displayed, press FUNCTION 2. The function
options are displayed.
2.
Use the arrow keys to select V. The display returns to the source and measurement value
display.
Setting the Source Range
3.
Under Function 2, press RANGE.
4.
Use the arrow keys to set the source range. The display returns to the source and measurement
value display.
Setting the Source Value
5.
With the source value and measurement value displayed, use the arrow keys to set the source
value.
Source value
Source range
When the source range is 1-5V or 1-5V√, pressing UP or DOWN changes the source value at a
given interval.
Turning the Source On and Off
6.
With the source value and measurement value displayed, press OUTPUT ON/OFF.
The displayed voltage is generated. OUTPUT:OFF on the screen changes to OUTPUT:ON.
To turn off the source, press OUTPUT ON/OFF again.
7.
When the source range is 1-5V or 1-5V√, press UP or DOWN to change the source value.
Divided Source
See section 2.8, “Dividing and Generating the Source Values”.
Sourcing with the Sweep Function
See section 2.9, “Sweep Source”.

YOKOGAWA CA500 Specifications

General

Brand	YOKOGAWA
Model	CA500
Category	Test Equipment
Language	English