viii
IM 710105-03E
Safety Precautions
This product is designed to be used by a person with specialized knowledge.
This instrument is an IEC protection class I instrument (provided with terminal for
protective earth grounding).
The general safety precautions described herein must be observed during all phases
of operation. If the instrument is used in a manner not specified in this manual, the
protection provided by the instrument may be impaired.
This manual is part of the product and contains important information. Store this manual
in a safe place close to the instrument so that you can refer to it immediately. Keep this
manual until you dispose of the instrument.
YOKOGAWA assumes no liability for the customer’s failure to comply with these
requirements.
The Following Symbols Are Used on This Instrument.
Warning: handle with care. Refer to the user’s manual or service manual.
This symbol appears on dangerous locations on the instrument which require
special instructions for proper handling or use. The same symbol appears in the
corresponding place in the manual to identify those instructions.
Functional ground terminal (do not use this terminal as a protective ground
terminal.)
Alternating current
Direct current
On (power)
Off (power)
French
Avertissement : À manipuler délicatement. Toujours se reporter aux manuels
d’utilisation et d’entretien. Ce symbole a été apposé aux endroits dangereux de
l’instrument pour lesquels des consignes spéciales d’utilisation ou de manipulation
ont été émises. Le même symbole apparaît à l’endroit correspondant du manuel
pour identifier les consignes qui s’y rapportent.
Borne de terre ou borne de terre fonctionnelle (ne pas utiliser cette borne comme
prise de terre.)
Courant alternatif
Courant direct
Marche (alimentation)
Arrêt (alimentation)
To Next Page
Loading...
Need help?
General
