EasyManuals Logo

YOKOGAWA DLM2000 Series Operation Guide

YOKOGAWA DLM2000 Series
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
2-6
IM 710105-03E
2.3 Connecting the Power
Before Connecting the Power Supply
Make sure that you observe the following points before connecting the power supply.
Failure to do so may cause electric shock or damage to the instrument.
WARNING
Before connecting the power cord, ensure that the source voltage matches the
rated supply voltage of the DLM2000 and that it is within the maximum rated
voltage of the provided power cord.
Connect the power cord after checking that the main power switch of the
instrument is turned off.
To prevent electric shock or fire, be sure to use the power cord for the instrument
that is supplied by YOKOGAWA.
Make sure to connect protective earth grounding to prevent electric shock.
Connect the power cord to a three-prong power outlet with a protective earth
terminal.
Do not use an ungrounded extension cord. If you do, the instrument will not be
grounded.
If an AC outlet that conforms to the supplied power cord is unavailable and you
cannot ground the instrument, do not use the instrument.
French
AVERTISSEMENT
Avant de brancher le cordon d’alimentation, vérifier que la tension source
correspond à la tension d’alimentation nominale du DLM2000 et qu’elle est
compatible avec la tension nominale maximale du cordon d’alimentation.
Brancher le cordon d’alimentation après avoir vérifié que l’interrupteur
d’alimentation principal de l’instrument est sur OFF.
Pour éviter tout risque de choc électrique ou d’incendie, utiliser exclusivement le
cordon d’alimentation fourni par YOKOGAWA et prévu pour l’instrument.
Relier l’instrument à la terre pour éviter tout risque de choc électrique. Brancher
le cordon d’alimentation sur une prise de courant à trois plots reliée à la terre.
Toujours utiliser une rallonge avec broche de mise à la terre, à défaut de quoi
l’instrument ne serait pas relié à la terre.
En l’absence de prise secteur conforme au cordon d’alimentation et dans
l’impossibilité de mettre l’instrument à la terre, ne pas utiliser l’instrument.

Other manuals for YOKOGAWA DLM2000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOKOGAWA DLM2000 Series and is the answer not in the manual?

YOKOGAWA DLM2000 Series Specifications

General IconGeneral
BrandYOKOGAWA
ModelDLM2000 Series
CategoryTest Equipment
LanguageEnglish

Related product manuals