YOKOGAWA DLM2000 Series

3-10
IM 710105-03E
3.4 Synchronizing the Clock
This section explains how to set the DLM2000 clock, which is used to generate
timestamps for measured data and files. The DLM2000 is factory shipped with a set date
and time. You must set the clock before you start measurements.
Procedure
1.
Press
UTILITY key to display the Utility menu.
System Configuration
2.
Press the
System Configuration soft key to display the system menu.
3.
Press the
Date/Time soft key to display the Date/Time Setup dialog box.
Date/Time
Turn the date and
time display on
or off
Set the date and
time display
format
Confirm the
settings
Set the year,
month, day, hour,
minute, and
second
Set the time
difference from
Greenwich Mean
Time
4.
Use the
jog shuttle and the SET key to set the date and time.