3-11
IM 710105-03E
Basic Operations
3
Explanation
Turning the Display On and Off (Display)
Sets whether or not to display the date and time on the DLM2000 screen.
Display Format (Format)
You can display the date in one of the following formats.
Year/Month (numeric)/Day
Day/Month (numeric)/Year
Day-Month (English abbreviation)-Year (the lower two digits)
Day Month (English abbreviation) Year
Time Difference from Greenwich Mean Time (Time Diff. GMT)
Set the time difference between the region where you are using the DLM2000 and
Greenwich Mean Time.
Selectable range: -12 hours 00 minutes to 13 hours 00 minutes
For example, Japan standard time is ahead of GMT by 9 hours. In this case, set Hour to
9 and Minute to 00.
Checking the Standard Time
Using one of the methods below, check the standard time of the region where you are
using the DLM2000.
• Check the Date, Time, Language, Regional Options on your PC.
• Check the standard time at the URL on the right.http://www.worldtimeserver.com/
Note
• The DLM2000 does not support Daylight Savings Time. To set the time to Daylight Savings
Time, reset the time difference from Greenwich Mean Time.
• Date and time settings are backed up using an internal lithium battery. They are retained
even if the power is turned off.
• The DLM2000 has leap-year information.
3.4 Synchronizing the Clock
To Next Page
Loading...
Need help?
General
