YOKOGAWA GX10 User Manual

2-107
IM 04L51B01-17EN
Commands and Responses
1
2
App
OUsbFApply
Applies USB Communication Settings
[GM]
Applies USB communication settings.
Syntax
OUsbFApply,p1
p1
Apply the settings
Example Apply the USB communication On/Off setting
specified with the SUsbFunction command.
OUsbFApply,0
OBTApply
Applies Bluetooth Communication
Settings (/C8) [GM]
Applies Bluetooth communication settings.
Syntax
OBTApply,p1
p1
Apply the settings (0)
Example Apply the Bluetooth communication On/
Off setting specified with the SBluetooth
command.
OBTApply,0
OBTClearList
Clears the Bluetooth Connection List (/
C8) [GM]
Clears the Bluetooth connection list.
Syntax
OBTClearList
(No parameters)
Example Clear the connected Bluetooth connection list.
OBTClearList
OLoginAssist
Assists Login [GX/GP]
Assists logging in to the recorder, during bar-code input.
Syntax
OLoginAssist,p1,p2,p3
p1
Input type (1, 2)
1 User name input
2 User name and user ID input
p2
User name
p3
User ID
Example Log in with the user name “User01.”
OLoginAssist,1,’User01’
Description
• When this command is executed, the recorder shows
the login screen and waits for a user password and
user ID input.
• p1 = 2 is valid when the advanced security function (/
AS) is enabled.
• p3 is valid when p1 = 2. However, when the user ID is
not used, p3 is invalid.
• This command is valid when the serial communication
function (the SSerialBasic command) is set to Barcode
or the USB input device (the SUsbInput command) is
set to Barcode.
OSendValue
Assists Touch Panel Operation Input
[GX/GP]
Assists text input during touch panel operation.
Syntax
OSendValue,p1,p2
p1
Fixed to 0.
p2
Character string (up to 64 characters,
UTF-8)
Example On the message settings screen, enter the
message “START” (display the message
settings screen and select the text box for
entering the message string in advance).
OSendValue,0,’START’
Description
• Input into a text area that displays asterisks (*****) is
not possible.
• This command is valid when the serial communication
function (the SSerialBasic command) is set to Barcode
or the USB input device (the SUsbInput command) is
set to Barcode.
OUserLockACK
User Locked ACK (/AS)
Clears the user locked display.
Syntax
OUserLockACK
Example Clears the user locked display.
OUserLockACK
Description
• This command can be executed only when the user is
logged in as an administrator.
• If there are no locked users, nothing will take place.
OKeyLock
Key Lock On/Off [GM]
Turns key lock on or off.
Syntax
OKeyLock,p1
p1
Key lock on/off (On, Off)
On
Locks the keys
Off
Releases the key lock
Example Release the key lock.
OKeyLock,Off
Description
• Turning the key lock on will lock the START, STOP,
USER1, and USER2 keys. You cannot lock the key
individually.
• Only administrator level users can turn key lock on
and off.
• This command is invalid when the advanced
security function (/AS) is enabled and the log in via
communication is enabled.
2.6 Operation Commands

YOKOGAWA GX10 Specifications

General

Brand	YOKOGAWA
Model	GX10
Category	Voice Recorder
Language	English