2-150
IM 04L51B01-17EN
Operation Event string ### information and detailed information
Math start MathStart —
Math stop MathStop —
Math reset MathRST### ### When multi batch is disabled: (space)
When multi batch is enabled:
(space) Resetting of all math channels
-01 to-12 Resetting of math channels
belonging to the specified
batch group
Acknowledge math
dropout
MathACK —
Mail start MailStart —
Mail stop MailStop —
Modbus manual
recovery
RefModbus ss•••
ss••• Type [Client, Master]
Manually SLMP
communication
recovery
RefSLMP —
Display data saved SaveDisp### ### When multi batch is disabled: (space)
When multi batch is enabled:
-01 to -12 Batch group number
Via event action
• During all save, only the batch groups that were
saved are recorded in the operation log.
• During all save, if there are no batch group that
were saved, ### is not added.
An operation log entry is recorded, and then an
error operation log entry is recorded.
Event data saved SaveEven### ### When multi batch is disabled: (space)
When multi batch is enabled:
-01 to -12 Batch group number
Via event action
• During all save, only the batch groups that were
saved are recorded in the operation log.
• During all save, if there are no batch group that
were saved, ### is not added.
An operation log entry is recorded, and then an
error operation log entry is recorded.
Manual data saved ManualSave ss•••
ss••• Data type [Data,
Report, ManualSample,
AlarmSummary].
[All] for all data. [Cancel] if
canceled.
Snapshot Snapshot —
Set batch number SetBatchNo### ### When multi batch is disabled: (space)
When multi batch is enabled:
-01 to -12 Batch group number
Set lot number SetLotNo### ### When multi batch is disabled: (space)
When multi batch is enabled:
-01 to -12 Batch group number
Batch text Field
setting
SetTextField### ### When multi batch is disabled: (space)
When multi batch is enabled:
-01 to -12 Batch group number
No:nn
nn Text field number
Display update rate
change
ChgRate ss•••
ss••• Trend interval string
Example:
1min/div
2.10 ASCII Output Format