YOKOGAWA GX10 User Manual

2-71
IM 04L51B01-17EN
Commands and Responses
1
2
App
SMltMultiKind
Multi Panel Type
Sets the multi panel pattern for multi batch.
Syntax
SMltMultiKind,p1,p2,p3,p4,p5
p1
Batch group number (1 to the number
used)
p2
Registration number (1 to 20)
p3
Screen position (1 to 6)
p4
Screen type (see p1 of the SMultiKind
command)
p5
Display group number
Query
SMltMultiKind[,p1[,p2[,p3]]]?
Example Set the panel of registration number 1 to “Split
2 Wide.” Set the panel name to “Monitor1.”
SMultiPattern,1,Wide2,’Monitor1’
Description
• This command is valid for the GX20/GP20.
• This command is valid when the multi batch function (/
BT) is enabled.
SBluetooth
Bluetooth Communication Function (/
C8) [GM]
Sets the Bluetooth communication function.
Syntax
SBluetooth,p1
p1
Bluetooth function On/Off (On, Off)
On
Use
Off
Not Use
Query
SBluetooth?
Example Use the Bluetooth communication function.
SBluetooth,On
Description
• The settings specified with this command take effect
with the OBTApply command. The settings do not
change until you send the OBTApply command.
SBTID
Bluetooth Communication ID (/C8) [GM]
Sets the Bluetooth communication ID.
Syntax
SBTID,p1
p1
Local device name (GM’s Bluetooth
device name)
Up to 30 characters, ASCII
Query
SBTID?
Example Set the local device name to “SMARTDAC+
GM.”
SBTID,'SMARTDAC+ GM'
SBTTimeOut
Bluetooth Communication Timeout (/C8)
[GM]
Sets the Bluetooth communication timeout.
Syntax
SBTTimeOut,p1
p1
Timeout function (Off, 1min, 2min, 5min,
10min)
Query
SBTTimeOut?
Example Set the Bluetooth communication timeout value
to 5 minutes.
SBTTimeOut,5min
Description
• If the login function is in use, users that are logged in
are automatically logged out when a timeout occurs.
SUsbFunction
USB Communication Function [GM]
Configures USB communication function settings.
Syntax
SUsbFunction,p1
p1
USB communication function On/Off (On,
Off)
On
Use
Off
Not Use
Query
SUsbFunction?
Example Use the USB communication function.
SUsbFunction,On
Description
• The settings specified with this command take effect
with the OUsbFApply command. The settings do not
change until you send the OUsbFApply command.
SUsbAutoLOut
USB Communication Auto Logout [GM]
Sets the auto logout for USB communication.
Syntax
SUsbAutoLOut,p1
p1
Auto logout function (Off, 1 min, 2 min, 5
min, 10 min)
Query
SUsbAutoLOut?
Example Set the USB communication’s auto logout time
to 2 minutes.
SUsbAutoLOut,2min
Description
• Users logged in via USB communication can be
automatically logged out.
2.4 Setting Commands

YOKOGAWA GX10 Specifications

General

Brand	YOKOGAWA
Model	GX10
Category	Voice Recorder
Language	English