YOKOGAWA PH450G User Manual

<9. OPERATION OF ISC (Induvtive Conductivity)>
9-3
IM 12A01A02-01E 8th Edition : Oct. 01, 2015-00
Temp.element Pt1000
Unit °C
Next
Start quick setup?
Yes
No
Chanage language
Quick setup
Measure Conductivity
Next
Measurement setup
Format YYYY/MM/DD
Date 2010/03/03
Time 17:04:07
Date/Time
Process parameter
Conduct1-TC1
0% value 0.000 nS/cm
100% value 1.000 S/cm
Finish
mA(output)
Temperature settings
Measuring unit /cm
Cell constant 1.880 /cm
(factory)
Next
Configure sensor
°C
°F
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
Conductivity
Concentration
Conduct.+Concenter.
Conduct1-TC1
Temperature1
Concent1-TC1
Conduct1-TC2
Concent1-TC2
/cm
/m
Next
Next
Next
Finish
Next
Monitor display
Pt1000
NTC30k
Figure 9.2 Quick setup
n Date/Time
The date display format can be selected from among the three types.
Enter the date or time of day by using the numerical keys.
For details, see section 10.5.4.
n Measurement setup
Select a suitable measurement parameter from among those displayed and set it up.
Measurement parameter setup can be made only when “ISC” is selected on the Sensor setup
screen.
For details, see section 10.1.1.
ISC
9

YOKOGAWA PH450G Specifications

General

Brand	YOKOGAWA
Model	PH450G
Category	Measuring Instruments
Language	English