22-2
IM WT1801-01EN
Overview (System Overview)
You can display the following information about the WT1800.
Item Description
Model The model number
Suffix The suffix code
No. The instrument number
Version The firmware version
Element Configuration The input element type
Options The options
Link Date The firmware date
Product ID A unique device ID that is assigned to each unit
(This number is necessary for the purchase of
additional options.)
Firmware Version and New Features
This manual covers firmware versions 2.01 or later of the WT1800. The following table contains new features
that are available for each firmware version. If you are using an older version, you will not be able to use all the
features described in this manual. To view the firmware version, press UTILITY and then the System Overview
soft key and check Version on the System Overview screen that is displayed.
Version Suffix Code New Features
2.01 or later /HS High Speed Data Capturing features
Chinese and German have been added
to the menu language and message
language.
Initializing the Settings (Initialize Settings)
You can reset the WT1800 settings to their factory default values. This feature is useful when you want to cancel
all of the settings that you have entered or when you want to redo measurement from scratch.
Only initialize the WT1800 if you are sure that it is okay for all of the settings to return to their initial values.
You cannot undo an initialization. We recommend that you save the setup parameters before initializing the
WT1800.
Items That Cannot Be Reset
The following settings cannot be reset.
Date and time settings, communication settings, the menu language setting, the message language setting, and
environment settings
To Reset All Settings to Their Default Values
While holding down RESET, turn the power switch on. All settings except the date and time settings (display
on/off setting will be reset) will be reset to their factory default values.
22 Utility
To Next Page
Loading...
Need help?
General
