York YZ MODEL A - Page 65

JOHNSON CONTROLS
65
SECTION 3 - OPTIVIEW™ CONTROL CENTER FUNCTIONS AND NAVIGATION
FORM 161.01-OM1
ISSUE DATE: 6/8/2018
3
PROGRAMMABLE
PROGRAMMABLE
BUTTON ACCESS LEVEL DESCRIPTION
Standard Week
Start/Stop
Times
Operator
For each day of the week, the user may specify a time for the chiller to start and
a time for the chiller to stop. The times specied in this entry week will be used
as the default for every week of chiller operation.
Exception
Start/Stop
Times
Operator
For each day of the month, the user may specify a time for the chiller to start and
a time for the chiller to stop. These Start / Stop combinations may be scheduled
up to ve (5) weeks in advance and also for the present week. As each week
goes by, the new schedule will be created for the present week using the Excep-
tion specication in combination with the Standard week denition, as described
above.
Select Operator
Places a selection box around a start time for a given day. Use ◄ , ► , ▲ or ▼
cursor arrows to place the box around the desired start or stop time for a given
day
Schedule
(Enabled /
Disabled)
Operator
Allows the user to enable or disable the scheduled starting and stopping of the
chiller.
Reset
Exceptions
Operator
Deletes all programming for exception days within the next 6 weeks.
Repeat Sunday Operator
Duplicates the schedule dened for Sunday for the remainder of the standard
weekdays.
Print Operator Generates a Schedule print report.
NAVIGATION
NAVIGATION
BUTTON DESCRIPTION
Home Causes an instant return to the Home Screen.
Setup Return to the previous Setup Screen.