Zapi ACE0 2mC - User Manual

ELECTRONIC • OLEODYNAMIC • INDUSTRIAL
EQUIPMENTS CONSTRUCTION
Via Parma, 59 – 42028 – POVIGLIO (RE) – ITALY
Tel +39 0522 960050 (r.a.) – Fax +39 0522 960259
E-mail: zapi@zapispa.it – web: www.zapispa.it
User Manual
ACE0 2µC
COMBIAC0 2µC
Publication: AF6ZP0CA
Edition: March 1, 2018
EN

Zapi ACE0 2mC Specifications

General

Brand	Zapi
Model	ACE0 2mC
Category	Inverter
Language	English

Summary

SPECIFICATIONS

Technical specifications

Key technical parameters including motor types, operating frequency, and environmental ratings.

Current ratings

Table detailing current specifications for different models and voltage configurations.

I;O INTERFACE DESCRIPTION

INSTALLATION HINTS

Installation of the hardware

Step-by-step guidance for physically installing the controller on a vehicle.

FEATURES

Protection and safety features

Details the controller's built-in protection mechanisms and safety compliance standards.

START-UP HINTS

Check prior to initial power up

Essential pre-power checks to ensure correct installation, wiring, and safety.

Configuring motor controller for the application

Set-up procedure for AC traction inverter

Set-up procedure for AC pump inverter

PROGRAMMING & ADJUSTEMENTS

Settings description

Detailed explanations of parameter groups like PARAMETER CHANGE, SET OPTIONS, and ADJUSTMENTS.

TESTER function

Explains how to use the TESTER function for real-time monitoring and diagnostics of controller status.

OTHER FUNCTIONS

Motor thermal protection

DIAGNOSTIC SYSTEM

ALARMS menu

Describes the logbook for alarms, their codes, and how to interpret them.

Alarms from master µC

Lists and describes specific alarms originating from the master microcontroller and their troubleshooting.

Alarms from supervisor µC

Lists and describes specific alarms originating from the supervisor microcontroller and their troubleshooting.

PERIODIC MAINTENANCE