Using the Device
51
Restarting the L10
There are two reset features on the L10: Restart and a hard reset switch.
Soft Reset
Reboot the device if applications stop responding.
1. Press the Power button until a small menu appears.
2. Touch Restart.
The device restarts.
Hard Reset
If the L10 is not responsive, you can use the reset switch on the face of the tablet. See the photo of the reset switch
in Figure 37 on page 51. This switch turns the power off immediately.
CAUTIONPerforming a hard reset with a microSD card installed in the L10 can cause damage or data corruption to the
memory card, causing all data on the microSD card to be lost.
1. If you have a microSD card installed in the tablet, remove it before you use the reset switch.
To access the microSD card, open the port cover on the left side of the tablet and remove the microSD card.
This removal will preserve the data on the memory card.
Figure 36 microSD Card Slot
2. Use the stylus tip on the tablet pen and insert it into the reset hole to press the recessed button until the tablet
shuts down. (You can also use a paper clip and unbend it to form a pin.)
Figure 37 Reset Switch on Front of Tablet
3. Restart the tablet by pressing the Power button.
4. Return the microSD card to the slot in the tablet.
microSD Card Slot
Hard Reset Button
To Next Page
Loading...
Need help?
General
