To Next Page

To Previous Page

Applications

Photo Settings

In Photo mode, photo settings appear on screen. Touch to display the photo settings options.

Front Camera

• Selfie Flash - Turns screen white to help produce a little extra light in dimmer settings. Options: Off (default), or

On.

• GPS location - Add GPS location information to the photo meta-data. Options: On or Off (default).

• Picture size - Set the size (in pixels) of the photo to: 5M pixels (default), 3M pixels, HD1080, 2M pixels,

HD720, 1M pixels, WVGA, VGA, or QVGA.

• Picture quality - Set picture quality setting to: Low, Standard (default), or High.

• Countdown timer - Set to: Off (default), 2 seconds, 5 seconds or 10 seconds.

• Storage – Set location to store the photo to: Phone or SD Card.

• Face Detection - Select to turn face detection Off (default) or On.

• ISO - Set how sensitive the camera is to light. Options: Auto (default), ISO Auto (HJR), ISO100, ISO200,

ISO400, ISO800 or ISO1600.

• Exposure - Touch to adjust the exposure settings. Options: +2, +1, 0 (default), -1 or -2.

• White balance - Select how the camera adjusts colors in different kinds of light, to achieve the most

natural-looking colors:

• Incandescent - Adjust the white balance for incandescent lighting.

• Fluorescent - Adjust the white balance for florescent lighting.

• Auto - Adjust the white balance automatically (default).

• Daylight - Adjust the white balance for daylight.

• Cloudy - Adjust the white balance for a cloudy environment.

• Redeye reduction - Helps eliminate redeye effect. Options: Disabled (default), or Enable.

• ZSL - Set the camera to immediately take a picture when the button is pressed (default – enabled)

• Selfie Mirror - Options: Disable (default), or Enable.

• Shutter Sound - Select to play a shutter sound when taking a photo. Options: Disable (default) or Enable.

• Anti Banding - Allows the camera to avoid problems caused by artificial light sources that are not constant.

These sources cycle (flicker) fast enough to go unnoticed to the human eye, appearing continuous. The

camera’s eye (its sensor) can still see this flicker. Options: Auto (default), 60 Hz, 50 Hz, or Off.

Rear Camera

• Flash - Select whether the camera relies on its light meter to decide whether a flash is necessary, or to turn it

on or off for all shots.

• Off - Disable flash.

• Auto - Adjust flash automatically depending upon light meter (default).

• On - Enable flash upon taking a photo.

• GPS location - Turn On or Off (default).

• Picture size - The size (in pixels) of the photo to: 13M pixels (default), 8M pixels (default), 5M pixels, 3M

pixels, HD 1080, 2M pixels, WXGA, HD720, 1M pixels, WVGA, VGA, or QVGA.

• Picture quality - Set the picture quality setting to: Low, Standard (default) or High.

Zebra L10 User Manual

Other manuals for Zebra L10