EasyManuals Logo

Zebra L10 User Manual

Zebra L10
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
Applications
76
Countdown timer - Select Off (default), 2 seconds, 5 seconds or 10 seconds.
Storage – Set the location to store the photo to: Phone or SD Card.
Face Detection - Select to turn face detection Off (default) or On.
ISO - Set camera sensitivity to light to: Auto (default), ISO Auto (HJR), ISO100, ISO200, ISO400, ISO800 or
ISO1600.
Exposure - Set the exposure settings to: +2, +1, 0(default), -1 or -2.
White balance - Select how the camera adjusts colors in different kinds of light, to achieve the most
natural-looking colors:
Incandescent - Adjust the white balance for incandescent lighting.
Fluorescent - Adjust the white balance for florescent lighting.
Auto - Adjust the white balance automatically (default).
Daylight - Adjust the white balance for daylight.
Cloudy - Adjust the white balance for a cloudy environment.
Chroma Flash - Sets the camera to take two pictures, one with flash and one without flash. The two images are
combined to produce a final image with the sharpness and clarity and bright color tones from a picture with the
flash, coupled with the natural colors of a picture without a flash. Options: Off (default) or On.
Redeye reduction - Helps eliminate redeye effect. Options: Disabled (default), or Enable.
ZSL - Set the camera to immediately take a picture when the button is pressed (default – enabled).
Shutter Sound - Select to play a shutter sound when taking a photo. Options: Disable (default) or Enable.
Anti Banding - Allows the camera to avoid problems caused by artificial light sources that are not constant.
These sources cycle (flicker) fast enough to go unnoticed to the human eye, appearing continuous. The
camera’s eye (its sensor) can still see this flicker. Options: Auto (default), 60 Hz, 50 Hz, or Off.
Video Settings
In Video mode, video settings appear on screen. Touch to display the video settings options.
Front Video Camera
Video quality - Set video quality to: HD 1080, HD 720, SD 480p, VGA, CIF, or QVGA.
Video duration - Set to: 30 seconds (MMS) or 30 minutes (default).
GPS location - Turn On or Off (default).
Storage – Set the location to store the photo to: Phone (default) or SD Card.
White balance - Select how the camera adjusts colors in different kinds of light, to achieve the most
natural-looking colors.
Incandescent - Adjust the white balance for incandescent lighting.
Fluorescent - Adjust the white balance for florescent lighting.
Auto - Adjust the white balance automatically (default).
Daylight - Adjust the white balance for daylight.
Cloudy - Adjust the white balance for a cloudy environment.
Image Stabilization - Set to reduce blurry videos due to device movement. Options: On or Off (default).

Table of Contents

Other manuals for Zebra L10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra L10 and is the answer not in the manual?

Zebra L10 Specifications

General IconGeneral
Display Size10.1 inches
ProcessorQualcomm Snapdragon 660
Battery LifeUp to 10 hours
Rugged RatingMIL-STD-810G
IP RatingIP65
RAM4GB
Storage64GB
ConnectivityWi-Fi, Bluetooth, 4G LTE
Operating SystemAndroid

Related product manuals