Accessories
118
Establishing Ethernet Connection
NOTE: Refer to the TC20 Mobile Computer Integrator Guide for Android 8.0 Oreo for information on configuring the Ethernet
settings.
1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .
2. Touch Ethernet.
3. Slide the Ethernet switch to the ON position.
4. Insert the device into a slot.
The icon appears in the Status bar.
5. Touch Eth0 to view Ethernet connection details.
Charging the Device
To charge a device:
1. Insert the device into the slot to begin charging.
Figure 90 Battery Charging
2. Ensure the device is seated properly.
To Next Page
Loading...