EasyManuals Logo

Zebra TC20 Series User Manual

Zebra TC20 Series
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
Accessories
125
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The device or cradle always performs
battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37°C (+98°F))
the device or cradle may for small periods of time alternately enable and disable battery charging to keep the
battery at acceptable temperatures. The power pack indicates when charging is disabled due to abnormal
temperatures via its LED.
Check Power Level
To check the power level of the power pack, press the LED button. The LEDs light indicating the charge level.
After five seconds the LEDs turn off.
Figure 100 Check Power Level
Solid Solid Flashing
Change level is between 66% and 95%.
Solid Solid Solid
Fully charged (95-100%).
Flashing
Charging error, e.g.:
Temperature is too low or too high.
Charging has gone on too long without completion (typically 10
hours).
Table 18 LED Charging Indicators (Continued)
LED State
LED 1 LED 2 LED 3 LED 4 Indication
LED 1LED 2LED 3LED 4
LED Button

Table of Contents

Other manuals for Zebra TC20 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra TC20 Series and is the answer not in the manual?

Zebra TC20 Series Specifications

General IconGeneral
RAM2 GB
Operating Temperature-10°C to 50°C
Display4.3 in. WVGA (480 x 800)
Storage16 GB
Camera8 MP rear camera
Battery3000 mAh
ConnectivityWi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, NFC
Dimensions134 mm x 73.1 mm x 16 mm
Weight195 g
Expansion SlotMicroSD up to 128 GB
Scanning1D/2D imager
Drop Specification1.2 m (4 ft) to concrete

Related product manuals