Zebra TC20 Series User Manual

Accessories
135
Device Removal
To remove the device from the Wrist/Arm Mount:
1. Press down on the release lever.
2. Slide the device out of the mount.
Figure 115 TC20 Removal
Scanning
To scan with device in the wrist mount, rotate the device as shown below.
Release Lever

Zebra TC20 Series Specifications

General

RAM	2 GB
Operating Temperature	-10°C to 50°C
Display	4.3 in. WVGA (480 x 800)
Storage	16 GB
Camera	8 MP rear camera
Battery	3000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, NFC
Dimensions	134 mm x 73.1 mm x 16 mm
Weight	195 g
Expansion Slot	MicroSD up to 128 GB
Scanning	1D/2D imager
Drop Specification	1.2 m (4 ft) to concrete