Name: Zebra TC20 Series
Brand: Zebra
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Data Capture

NOTE: To enable Basic MultiBarcode Mode, configure in DataWedge or set in an application using a API command.

• Basic MultiBarcode Mode: In this mode, the device attempts to locate and decode a specific number of

unique barcodes within its field of view. The device remains in this mode as long as the user holds the scan

button, or until it decodes all the barcodes. Available on integrated SE2100 or SE4710 imagers only.

• The device attempts to scan the programmed number of unique barcodes (from 2 through 10).

• If there are duplicate barcodes (same symbology type and data), only one of the duplicate barcodes is

decoded and the remainder are ignored. If the label has two duplicate barcodes plus another two

different barcodes, a maximum of three barcodes will be decoded from that label; one will be ignored as

a duplicate.

• Barcodes can be of multiple symbology types and still be acquired together. For example, if the

specified quantity for a Basic MultiBarcode scan is four, two barcodes can be symbology type Code 128

and the other two can be symbology type Code 39.

• If the specified number of unique barcodes is not initially in view of the device, the device will not decode

any data until the device is moved to capture the additional barcode(s) or time out occurs. If the device

field of view contains a number of barcodes greater than the specified quantity, the device randomly

decodes barcode(s) until the specified number of unique barcodes is reached. For example, if the count

is set to two and eight barcodes are in the field of view, the device decodes the first two unique barcodes

it sees, returning the data in random order.

• Basic MultiBarcode Mode does not support concatenated barcodes.

RS507/RS507x Hands-Free Imager

The RS507 and RS507x Hands-free Imagers are wearable barcode scan solution for both 1D and 2D bar code

symbologies. The scanner supports Bluetooth Human Interface Device (HID) connection to the device.

Figure 64 RS507/RS507x Hands-Free Imager

Refer to the RS507/RS507x Hands-free Imager Product Reference Guide for more information.

Other manuals for Zebra TC20 Series

Questions and Answers:

Need help?

Do you have a question about the Zebra TC20 Series and is the answer not in the manual?

General