Getting Started
30
Wake-Up Sources
By default the device wakes from suspend mode when the user presses the power button. The device can be
configured to wake when the user presses the PTT on the left side of the device or one of the Scan buttons.
1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .
2. Touch System > Wake-Up Sources.
3. Touch one or more of the options:
• Touch Key_PTT checkbox to enable the right scan button. A check appears in the checkbox.
• Touch Key_Scan checkbox to enable the either scan button. A check appears in the checkbox.
Figure 23 Wake-Up Sources
4. Touch .
To Next Page
Loading...