OPERATION
Axio Observer ZEISS
12/2016 431004-7244-001 71
5 OPERATION
The Axio Observer microscopes is available with six different stand versions.
− Axio Observer 3, 3 materials (manual / coded version)
− Axio Observer 5, 5 materials (coded / semi-motorized version)
− Axio Observer 7, 7 materials (fully motorized version, including motorized Z-drive)
The Operation section describes basic settings, Light Manager and Contrast Manager settings, TFT display
operation, and illumination and contrast procedures on the Axio Observer (operating functions of the six
stand versions are described in sections 5.1 and 5.2).
The Axio Observer 5 stand is equipped with an LCD on the transmitted light carrier and the
Axio Observer 5 materials stand with a holder with LCD display.
The TFT display can only be used with the Axio Observer 7, 7 materials stand. Operation of the
microscope using the TFT display touchscreen is described separately in section 5.11.
This manual does not describe operation of the motorized Axio Observer 7, 7 materials using a connected
PC.
The Axio Observer 3, 5, 7 microscopes have been designed for use with incubators and
micromanipulators. For information on connection and operation of these units, please see the relevant
operating manuals.
To Next Page
Loading...
