Safety
Axiostar plus Unpacking Transport, Storage, Operation Carl Zeiss
B 40-815 e 12/01 VII
Unpacking, Transport, Storage
Please observe the following safety notes when
unpacking, transporting and storing the
Axiostar plus microscope:
– In accordance with standard practice, the
microscope is supplied in a plastic container
with cardboard packaging; only use the
original packaging for transport.
– Retain the packaging for longer storage
periods or to return the instrument to the
manufacturer.
– When unpacking, use the delivery note to
ensure that all configurations and modules
are present.
– Observe transport and storage tempera-
tures in accordance with the technical data.
– Place the microscope on a stable work
surface.
– Keep optical surfaces free of fingerprints.
Disposal
When disposing of the Axiostar plus
microscope, please observe the following safety
notes:
– Defective microscopes should not be placed
in ordinary domestic waste;
they should be disposed of in accordance
with the relevant statutory provisions.
Operation
Please observe the following safety notes when
using the Axiostar plus microscope:
– The microscope can be operated with a line
voltage of 100 − 240 V.
– The microscope must be connected only to
a properly installed outlet featuring a
grounding contact; the grounding effect
should not be made ineffective with an
extension cable that does not have a
protective ground wire.
– If it is established that the protection meas-
ures are no longer effective:
⇒
switch off the microscope
⇒
safeguard against inadvertent operation
⇒
contact an authorized workshop or the
manufacturer for repairs.
– Always disconnect the instrument from the
line before opening the instrument,
changing the lamps or changing the fuses!
– Only use fuses for the required rated
power!
– The use of makeshift fuses and the short-
circuiting of the fuse holders are not
permitted!
Be careful of light-emitting diode radiation
when using the LED illuminator. Do not look
directly into the illuminator with your bare eyes
from a short distance. When adjustments are
required, the intensity must be reduced
accordingly via the potentiometer, or a suitable
attenuator must be used.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
To Next Page
Loading...
