Zetor FORTERRA 95 - Rear Three-Point Hitch; Safety Principles of Working with the Three-Point Hitch

100
HITCHES
E451
REAR THREE-POINT HITCH
It is intended for attaching carried or
semi-carried agricultural machines and
implements with hitching points of ISO
category II.
Category II.
Hitch axis length 870 mm
∅ of openings of connect-
ing balls of the lower
draw-bars according to
ISO
28 mm
∅ of the upper draw-bar
opening
25 mm
1. Upper draw-bar
2. Left lifting draw-bar
3. Right lifting draw-bar
4. Limiting draw-bars
5. Lower draw-bars
G452
SAFETY PRINCIPLES OF WORKING
WITH THE THREE-POINT HITCH
Persons that are not authorized to
work with the attached implement
must not stand between the tractor
and the hitched machine (imple-
ment) - (A). Do not park the tractor
with an attached implement in the
lifted position (B). During a drive
without an implement the lower
draw-bars (5) must be connected
with springs and the upper draw-
bar (1) must be inserted into the
spring suspension! During transport
of implements the limiting draw-
bars (4) of the lower draw-bars
must be adjusted in such a way to
avoid unwanted lateral movement
of the implement!