83
HYDRAULIC SYSTEM
F_02_124
OUTER HYDRAULIC CIRCUIT
The outer circuit supplies pressurized oil
to hydraulic implements connected to the
outer outlets of the hydraulic system ter-
minated with quick-couplers.
The sockets of the rear (A) as well as
front (B) quick-couplers have the inner
diameter of 12.5 mm and comply with the
international ISO 5675 standard.
CONNECTING AND DISCONNECTING
QUICK-COUPLERS
When connecting and discon-
necting the quick-couplers pay
increased attention with regard
to the residual oil that remains in
the socket or on the plug of the
quick-coupler.
For environmental reasons after
every disconnection of quick-
couplers this residual oil must be
removed with any textile mate-
rial.
To Next Page
Loading...
