147
MAINTENANCE INSTRUCTIONS
F_02_27 F_02_84 F_02_85
DISMANTLING THE FRONT SIDE
PLATE OF THE HOOD
The right as well as the left side plate of
the hood can be removed from the trac-
tor after unlocking of the safety peg.
Note: Perform the assembly and disas-
sembly from the operator’s position in
front of the front axle.
DISMANTLING THE REAR SIDE
PLATE OF THE HOOD
After unlocking the safety peg lift the
right and left side plate in its front part
and slide it toward the front to make the
fixing pins located in the rear part of the
side plate leave the rubber bushings.
Then, lift the whole side plate and re-
move it.
To Next Page
Loading...
