53
DRIVING OPERATION
F_02_34 F_02_43 F96
GEAR SHIFTING
The tractors are equipped with a four-
speed synchronized gearbox, three-
stage torque multipliers and two-speed
reduction.
The four-speed gearbox is controlled
with the main shifting lever with control
buttons of the torque multiplier (1). The
forward and reverse motion of the tractor
is selected with the reversing lever (2).
The gearbox does not make it
possible to use the fourth speed
for the reverse motion.
REVERSING LEVER
The reversing lever is used to select the
driving direction of the tractor (forward,
reverse).
F -
Forward drive
N -
Neutral
R -
Reverse drive
The reversing gearbox offers 18 reverse
speeds that are approximately as fast as
the forward speeds. Therefore, consider
well and select a suitable reverse speed
for the particular character of work.
Shift the reversing lever with the
clutch pedal depressed and the
tractor standing. To drive in the
reversing direction move the re-
versing lever to the R position.
SHIFTING OF ROAD AND REDUCED
GEAR SPEEDS
H -
- Road gears
N -
Neutral
L -
- Reduced gears
Shifting of gears of the main gearbox at
reduced gear speeds is the same as in
the case of road speeds
The shifting lever of road and re-
duced speeds can only be shifted
with the tractor at standstill.
To Next Page
Loading...
