169
ADJUSTMENT
F_02_204 C756
ADJUSTING THE PLAY OF THE
BRAKE PEDALS
The proper play between the piston rod
of the brake pedals and the piston of the
main cylinder is 0.5 - 1.0 mm (3 - 6 mm
measured at the edge of the brake ped-
als with the pedals disconnected). Per-
form the adjustment with the pedals dis-
connected and after releasing the ad-
justment nut (1) that the piston rod is
screwed in.
BLEEDING THE BRAKE SYSTEM OF
THE TRACTOR
Do the bleeding with the pedals discon-
nected, for each wheel separately, as fol-
lows:
Note: When bleeding the hydraulic
brake circuits you must always de-
press one pedal (1) by 7.5
+0,5
mm,
measured at the piston rod of the
main brake cylinder, which amounts
to 3
+0,2
mm at the adjustment screw
(2) and do the bleeding with the
other pedal. To maintain the proper
distance insert between the pedal
(1) and adjustment screw (2) a
gauge with the corresponding
thickness, i.e. 3
+0,2
mm.
To Next Page
Loading...
