41
ACQUAINTANCE WITH THE TRACTOR
E145b D102
ENGINE STOPPING CONTROL
By pulling the control upwards you will
stop the engine run immediately and by
turning it in the pulled position you will
lock its position.
When the engine run has stopped, return
the control to the original position.
If the control remains pulled up,
the engine cannot be started.
TORQUE MULTIPLIER
PRESELECTION SWITCH (I)
a - Preselection switch “OFF”
b - Preselection switch “ON”
Position (b) - preselection switch “ON” is
indicated by the illuminated symbol on
the switch.
If the preselection switch (b) is “ON”, on
each pressing of the clutch pedal the
medium stage of the multiplier M is
automatically engaged - on the
dashboard one indicator with the tortoise
symbol is lit (see chapter Driving Opera-
tion / Indication of the multiplier function
of the “Operator’s Manual”)
After releasing of the clutch pedal the
multiplier can be controlled with the but-
tons on the shifting lever.
During engine starting the switch
must be in the “OFF” position (a).
To Next Page
Loading...
