105
HITCHES
X464 E466 E467
HYDRAULIC LOCK OF THE FRONT
THREE-POINT HITCH
Hydraulic locking of the front three-point
hitch is performed in any position of the
hydraulic cylinders with the ball valve in
the front part of the tractor (2).
A
Free position
Valve levers are in the horizontal
position
- The hitch can be controlled
from the cabin
B
Locked position
Valve levers are in the vertical
position
- The hitch is locked
WORKING AND TRANSPORT
POSITION OF THE FRONT THREE-
POINT HITCH
A
Working position of the front
three-point hitch
B
Transport position of the front
three-point hitch
Changing the position of the draw-bars
of the front three-point hitch:
1. Release and remove the pin (1) from
the opening.
2. Lift the arm from position (A) to posi-
tion (B).
3. Lock the arm by inserting the pin (2)
in the opening (2) and secure the pin.
Only insert the pin in the open-
ings, never check whether the
opening is free with your fingers!
DRIVING WITH AGRICULTURAL
MACHINES ATTACHED TO THE
FRONT THREE-POINT HITCH
The maximum permissible speed
of the tractor with agricultural
machines attached to the front
three-point hitch is 15 km/h.
If no implement or weight is at-
tached to the front three-point
hitch, we recommend you to lift
the lower lifting draw-bars to the
transport position.
To Next Page
Loading...
