52
DRIVING OPERATION
F_02_33a F_02_35
IMMEDIATELY AFTER STARTING
After starting set the engine
speed to 800 - 1000 rpm and let
the engine run without loading for
approx. 2 minutes.
During this time check the lubrication,
charging, hydrostatic steering (the indica-
tors must go off) and other functions en-
suring proper operation of the engine.
The period of running the engine without
loading must be observed, especially in
winter.
ENGINE PREHEATING
Continue preheating the engine while driving. Preheating the engine by
means of a long idle run or abrupt increasing of the engine speed is harmful
for the engine.
Until the coolant temperature reaches 45°C, do not exceed the engine speed
of 2000 rpm.
To Next Page
Loading...
