Zetor FORTERRA 95 - Shifting from Higher to Lower Gear Speed; Shifting from Lower to Higher Gear Speed; Three-Stage Torque Multiplier

54
DRIVING OPERATION
F_02_44 F_02_45 F99
SHIFTING FROM LOWER TO HIGHER
GEAR SPEED
Depress the clutch pedal (clutch disen-
gaged). At the same time release the
foot throttle pedal and shift the required
higher gear. Smoothly release the clutch
pedal (the clutch starts engaging) and at
the same time increase the engine
speed.
SHIFTING FROM HIGHER TO LOWER
GEAR SPEED
Depress the clutch pedal and move the
shifting lever via the neutral position to
the lower gear.
Note: To extend the life of the syn-
chromesh you can shift the gear from
higher to lower speed using the “double
clutch depressing”.
THREE-STAGE TORQUE MULTIPLIER
The three-stage multiplier is standard
equipment of all tractor types.
Shifting of individual stages of the three-
stage multiplier is controlled with two but-
tons on the main shifting lever head.
It is performed without depressing of the
travelling clutch pedal (under load).
The entire shifting is automatic even
when the tractor is loaded.
H -
1.00 ratio (high stage)
M -
1.16 ratio (medium stage)
L -
1.34 ratio (low stage)