157
MAINTENANCE INSTRUCTIONS
F_02_118 F_02_136
DRAIN OPENINGS AND PLUGS
Pos. Opening, plug
(1) - Oil from the clutch box
(2) - Gearbox oil
(3)(4)(5) - Oil from the final drive
housing
CHECKING AND REPLACING GEARBOX OIL
Fill oil up to the upper edge of the dipstick tab (1) or up to one of the marks as neces-
sary depending on the way the tractor is used. Measure the oil level in the gearbox
with the engine stopped by completely inserting the plug with the dipstick to the pipe
mouth.
Gearbox oil level
Tractor use
A
minimum standard operation
B normal
standard operation
C
+7 l (increased) working on a slope
D
+15 l (maximum) aggregation with machines with higher external oil
consumption
The filling opening of gearbox oil (2) is located in the hydraulic system lid. It is acces-
sible from the rear side of the tractor.
To Next Page
Loading...
