76
DRIVE OF AGRICULTURAL MACHINES
F146
WORKING WITH PTO
1. When working with the PTO make sure that all the covers are properly
attached.
2. After the end of the work always reassemble the PTO guard.
3. Always connect and disconnect the articulated shaft of the attached
machine to and from the tractor with the lever of dependent and
independent rpm of the PTO shifted to the N - Neutral position.
4. Any repairs or cleaning of parts of attached machines driven by the PTO
may only be carried out with the engine stopped, PTO clutch disengaged
and the lever of the dependent and independent PTO rpm shifted to the N -
Neutral position.
To Next Page
Loading...
