Uncoupling of a single-axle traile
Hook of the mounting for a single-axle trailer
Coupling with a trailer or semi-trailer
This can be performed after slight lifting of the hitch by the
inner hydraulic circuit lever.
Move the control lever backwards.
The lever is located on the left side of the driver's seat.
Lower the hitch using the inner hydraulic circuit lever and
disconnect the trailer pole eye.
E311
The hook of the mounting for a single-axle trailer is
located in the bracket on the left-hand side of the cabin
back wall.
G313
The tractor can be coupled only with a tractor trailer after
matching of operating brakes of the tractor and pneumatic
or hydraulic brakes of the trailer.
In case of coupling with a semi-trailer the static loading of
the rear axle of the tractor may not exceed the maximum
permitted value.
G900a
To Next Page
Loading...
