Zetor PROXIMA HS Series - Front PTO Shaft; Maximum Transferred Output; Drive of Machines with Greater Inertia Masses

Front PTO shaft
Maximum transferred output
P15N038
Front PTO shaft is equipped with a solid six or twent
y
-one
splined end point and it comes only in design of 1,000
revolutions.
Tractor may be equipped with front PTO shaft with varied
direction of spinning:
a - In compliance with the direction of engine
revolutions (standard)
b - Against the direction of engine revolutions
(*on request)
F_02_64
Drive of machines with greater inertia masses
(crushers, rotary harrows, reaping machines, etc.)
Output shaft Transferred power
front
1,000 min
-1
60 kW*
rear
1,000 min
-1
full engine power
540 min
-1
full engine power
540E min
-1
full engine power
Cardan shaft for drive of these machines must be
equipped with the so called freewheel clutch which
ensures disconnection of torque transfer with retroaction
from the machine on the tractor.
troj
PTO DRIVE OF AGRICULTURAL MACHINES
111