Multiplier preselection switch 91
Multistage adjustable suspension 101
N
Non-permitted starting 79
O
Oil for the front driving axle 164
Oil for the front driving axle 166
Oil for the hydrostatic steering of the tractors 164
Oil for the hydrostatic steering of the tractors 167
Oil in the gearbox and final drivehousing 164
Oil in the gearbox and final drivehousing 165
Oil in the rear axle gantries 164
Oil in the rear axle gantries 166
Oils for Zetor engines which are equipped with diesel
particle filter
165
One-hose and two-hose brakes 95
One-hose brakes 95
Opening doors from the outside 27
Opening the door from the inside 27
Operation 79
Operation of heating or air-condition with tractor´s work 36
Other recommended service fillings tested on Zetor
tractors
165
Outer hydraulic circuit 121
Outer hydraulic circuit 133
Outer hydraulic circuit controls 122
Outer hydraulic circuit controls 133
P
P.T.O. drive of agricultural machines 107
Panel of the instrument panel 40
Parking brake adjustment 189
Passenger´s seat 30
Pedals and levers 44
Performance on rear PTO shaft 197
Permitted combinations of wheels for tractors 197
Permitted maximum load of front axle (kg) 193
Permitted maximum load of rear axle (kg) 193
Permitted maximum weight of set 'tractor + mounted
machine' (kg)
193
Plastic lubricant for the tractor 167
Position regulation of the lifting of the rear three-point hitch 119
Possible adjustable tracks of the front wheels of the front
driving axle of the tractors
143
Pouring oil to engine 172
Power regulation of the lifting of the rear three-point hitch 120
Preventive daily maintenance 16
Preventive daily maintenance 23
Preventive daily service 23
Principles for operating tractors equipped with front end
loader 20
Principles for safe handling of urea (AUS 32, DEF) 72
Procedure of draining liquid from the tyres 151
Procedure of filling the tyres with liquid 150
Proper clothing 13
Proper function of the heating and air-condition system 35
Protection of cab against aerosols 17
PTO selection control lever 45
Push button of rear, front differential locks 42
Q
Quick sinking 126
Quick-couplings with drip collection 114
R
Rear independent PTO shaft rotation 199
Rear three-point hitch 137
Rear view mirrors 30
Rear wheel track change 147
Rear wheels wheel track 146
Rear window 28
Rear window wiper 39
Reduction of the engine power and engine revolutions 75
Repairs and maintenance of the system of additional
treatment of exhaust gases
76
Replaceable end points of rear PTO shaft 109
Replacement of carter exhaust oil separator filter element 173
Replacement of the transmission oil cleaner element with
hydraulic pump suction filter 179
Replacing coolant 177
Replacing dry filter locking element 174
Replacing full-continuous motor oil filter 172
Replacing oil and hydrostatic steering filter element 175
Replacing the hoses of hydrostatic steering 176
Replenish fuel 65
Reversing lever 44
Reversing lever 85
Reversing lever position signalization 85
Right rear panel 29
Road and reduced speeds shifting lever 45
Running-in the tractor 99
S
Safety cab 27
Safety instructions for lubrication of the tractor 169
Safety instructions for users 13
Safety labels 21
Safety principles of working with the three-point hitch 137
Securing lower draw bars with CBM hooks 140
Selection of holes in the bracket 139
Service brake adjustment 189
Service inspections 161
Service menu 59
Setting of the display of the rear PTO shaft speed 62
Setting of time 63
Setting the control of three-point hitch 128
Setting wheel stops with front drive axle 145
Shelf 29
Shifting road and reduced speeds 86
Short functional test 26
Side window 28
Signalling of whether DPF is full 76
Solid front drive axle 169
Specification of oil for the front driving axle 165
Specification of oil for the tractor hydrostatic control
system
165
Specification of oils for Zetor engines equipped by diesel
particle filter
164
Specification of the oil for the gearbox housing and the
final drive housing
164
Specification of the oil for the portals 165
Speed of the Zuidberg front PTO 200
Starting the engine 80
Starting the engine 14
Starting the engine while using coolant heater 80
Steps performed daily before the start of work 161
Steps performed every 100 hours of work 161
Steps performed every 50 hours of work 161
Steps performed every 500 hours of work 161
Steps performed outside the interval of 500 hours of work 162
Stop position 127
Stopping the engine 97
Storing the tractor 183
Sun screen 28
Swinging draw-bar console module 102
Swinging draw-bar console with a fixed pin module 102
Switch air-condition (C) 34
Switch box 42
Switch box key in the position (0) 43
Switch box key in the position (I) 43
Switch box key in the position (II) 43
Switch of warning lights 41
Switching on the rear PTO shaft - dependent revolutions 110
Switching on the rear PTO shaft - independent revolutions 110
Symbols of tractor nodes 59
System of additional treatment of exhaust gases 69
System of treatment of exhaust gases - setting 64
System of treatment of exhaust gases - setting 77
T
Technical data of engines 192
Technical maintenance of the tractors after a general
overhaul of the main groups 170
Tensile force 198
To Next Page
Loading...
Need help?
General