ZIEHL-ABEGG ECblue - Vversion with Connection Via M12 Connector

Examples
Do not loosen the safety screws from the housing!
Connection
Diagram
Lead
Color
on field side
according to
local / national
requirements
e.g.
NEC / NFPA
BU
BN
WH
WH
GNYE
N
L1
RC
RC
PE
PWM
BK Data
+
0
-10V /
YE
Digital In
GN
BU
RD
WH
OC Out
Data -
BN
A
E1
D1
GND
10V
A1
B
GN or GNYE
WH or GR
BU or RD
00700859
12.01.2015
The bands around the cables show national colour codes which may be
available on the field side.
For line and relay: hose cable 5 x 1.0 mm
2
(18 AWG) comparable LiYY-JB
BN
BU
GNYE
WH
WH
length approx. 0.6 m *
brown L1
Lineblue N
green-yellow PE
white 11
Relay
white 14 K1
For control: hose cable 7 x 0.34 mm
2
(22 AWG) comparable LiYY-OB
BK
WH
BN
BU
YE
GN
RD
length approx. 0.6 m *
brown B (D-) MODBUS (RS-485)
black A (D+) MODBUS (RS-485)
white A1 OC Out Status (Tacho)
green D1 Digital In 1
yellow E1 Analog In 1
blue GND
red 10V
DC Out
* The lead length can vary according to the version.
5.4 VVersion with connection via M12 connector
Information
•
When assembling the connecting cables with M12 connectors, refer to the connection diagrams
with pin assignment supplied and the connection diagram contained in the instructions.
•
The type, count, coding and pin assignment of the plug connections may vary depending on the
version.
•
Tighten the ring nut on the side of the connecting cable hand tight to lock the plug connection.
•
It is not necessary to remove the lid for the connection.
Assembly instructions ECblue Electrical installation
L-BAL-F055D-GB 2021/51 Index 006 Part.-No.
19/56