11.3 EC Declaration of Incorporation - Translation -
(english)
ZA87-GB 2021/40 Index 011
as defined by the EC Machinery Directive 2006/42/EC,
Annex II B
The design of the partly completed machine:
Axial fan DN.., FA.., FB.., FC.., FE.., FF.., FG.., FH.., FL.., FN.., FS.., FT.., FV.., VN.., VR.., ZC.., ZF..,
ZG.., ZN..Centrifugal fan ER.., GR.., HR.., RA.., RD.., RE.., RF.., RG.., RH.., RK.., RM.., RR.., RZ..,
WR..Cross-flow fan QD.., QG.., QK.., QR.., QT..,
Motor type:
Induction internal or external rotor motor (also with integrated frequency inverter)Electronically
commutated internal or external rotor motor (also with integrated EC controller)
Complies with the requirements in Appendix I, Articles 1.1.2, 1.1.5, 1.4.1, 1.5.1 in EC Machinery
Directive 2006/42/EC.
The manufacturer is ZIEHL-ABEGG SE
Heinz Ziehl Straße
74653 Künzelsau, Germany
The following harmonized standards have been applied:
EN 60204-1:2018 Safety of machinery – Electrical equipment of machines –
Part 1: General requirements
EN ISO 12100:2010 Safety of machinery – General principles for design – Risk
assessment and risk reduction
EN ISO 13857:2008 Safety of machinery – Safety distances to prevent hazard
zones being reached by upper and lower limbs
Note: Compliance with EN ISO 13857:2008 relates only to the
installed contact protection if it is part of the scope of deliv-
ery.
The special technical documents in accordance with Appendix VII B have been created and are
available in full.
The following persons are authorized to compile the technical documents, address see above.
Upon reasonable request, the special documents shall be transmitted to the public authority. The
transfer can be made electronically, on data carriers or on paper. All property rights remain with the
aforementioned manufacturer.
Assembly instructions ECblue Enclosure
L-BAL-F055D-GB 2021/51 Index 006 Part.-No.
51/56
To Next Page
Loading...
