7 Operating hand held terminal A-G-247NW
7.1 Menu operation
" Switch over between actual value* and “Start” with
|
Esc
|
arrow key.
" Switch over between “Start” and actual value* with
|
i
|
key.
* Actual value depending on device type: "Speed" / rpm, "Frequency" / Hz, "Modulation" / %
" By pushing the P- key one reaches the menu item “Start”.
" Return to the menu group “Start” using arrow key
|
Esc
|
.
P↓
▲ ▼
" One moves up and down within the menu group using the arrow keys.
Display for english menu language = “GB ”
7.2 Menu structure
PIN 0010
STOP
← ← ← ← User
Service → → → →
▲
▼
▲
▼
▲
▼
▲
▼
↑
|
Esc
|
P
↓
↑
|
Esc
|
P
↓
↑
|
Esc
|
P
↓
↑
|
Esc
|
P
↓
↑
|
Esc
|
P
↓
▲ ▼
▲ ▼
▲ ▼
▲ ▼
Display for english menu language = “GB ”
Selection of the menu group (e.g. “Setting”) to the right through the ▼-key, to the left through the ▲-key.
You can go to the menu items in the menu groups (e.g. “Set Intern1”) by using the P-key. Use the arrow keys to move up and
down within the menu group.
The menu groups consist of one area for the user (user menu) and one area for installation (service). The service area can be
protected against unauthorized access by using a PIN.
To make adjustments, press the P-key after selecting the menu item. If the previously set value starts to flash, it can be adjusted
with the ▼ + ▲ keys and then saved with the P-key. To exit the menu without making any changes, use the “Esc” key, i.e., the
originally set values remain.
Assembly instructions ECblue Operating hand held terminal A-G-247NW
L-BAL-F055D-GB 2021/51 Index 006 Part.-No.
28/56
To Next Page
Loading...
