Zimmer PhySys - Stimulation Current Specifications

Technical information
10.2 Stimulation current
10
Page 37
Emitted output (max.)
At a load resistance of 500 Ohm
Galvanisation (mA eff)
80
Diadynamic
currents (mA eff)
20
High voltage currents
(mA peak)
250
Medium-frequency
currents
(mA peak/mA eff)
140/100
Interference
currents (mA eff)
100
Microstimulation current
(mA peak)
2
Low-frequency
square-wave currents
(mA peak/mA eff)
80/80
Accuracy
± 20%
Applied part
Stimulation current electrodes
Polarity of the currents
If currents have a polarity: Red = positive (+),
Black = negative (-)
Note:
Please note that the amperages emitted decreased with increasing patient impedance. This
can be read on the bar graph.