PhySys is manufactured according to the EN 60601-1 safety regulations.
As the manufacturer, Zimmer MedizinSysteme GmbH can only consider itself to be responsible
for safety and reliability if
• the device is operated using a proper power outlet with earth contact and the electrical
installation complies with DIN VDE 0100 part 710,
• - the equipment is operated in accordance with the instructions for use,
• extensions, readjustments or modifications are carried out only by persons authorised by
Zimmer MedizinSysteme GmbH,
• the user has confirmed the functional safety and the proper operating condition for him-
/herself before use,
• prior to each use, the ultrasound transducer, cables and plugs are inspected for damage
(such as cracks) which could impair the safety of the device,
• the device is operated only by properly trained personnel,
• the device is not operated in hazardous areas and / or a combustive atmosphere,
• the device is immediately disconnected from the mains when penetrated by liquid.
The device does not contain any parts that can be serviced or repaired by the operator.
Fuses and other spare parts may be replaced only by trained service staff.
Changing the lithium battery by untrained persons can result in a hazard.
Device service may only be performed by trained staff. All descriptions required for service can
be seen in the PhySys service manual or can be requested from the manufacturer. Upon
request, Zimmer MedizinSysteme will provide wiring diagrams, lists of components,
descriptions, calibration instructions or other documents.
To Next Page
Loading...
