9.1 Electrotherapy
The following information applies for all forms of therapy available in the system.
If the therapy times are individually extended, this may cause a change in the mode of action
and the patient must be observed more closely during the application.
Using the button (1), the “Programmes - Electrotherapy” window opens.
In “Programmes – Electrotherapy“ the current forms are divided according to current form
group (when the setting “parameter-related” was selected during configuration).
Current form group /
Select current form
The desired current form group as well as the current form are selected directly in the
corresponding line.
To Next Page
Loading...
